The led light strip refers to the assembly of the LED on a strip-shaped FPC or a PCB hard board, and the name of the product is

Led light strip

The led light strip refers to the assembly of the LED on a strip-shaped FPC (flexible circuit board) or a PCB hard board, and the name of the product is named like a tape.
Because of its long service life (generally normal life of 50,000 hours), it is very energy-efficient and environmentally friendly and has gradually emerged in various decorative industries.

The light strip is the abbreviation of the LED light strip.
Most people say that the noun is too long, so the front LED is omitted, and it is called the light strip directly.
These kind of light strip also includes the old-fashioned strips that directly connect the LEDs without the FPC or the PCB,
and of course the flexible strips and the hard strips, which are used in many previous large, second, and second lines.

LED light strips are generally divided into flexible LED strips and LED hard strips,
but generally also include old-fashioned strips that use LEDs to connect LEDs,
such as flat three-wire 4.3W/m, flat four-wire 6.48W/m, flat five-wire. 8.64W/m light belt and so on.

1. The flexible LED strip is assembled by FPC and assembled with SMD LED, so that the thickness of the product is only the thickness of one coin, which does not occupy space;
The general specifications are 30cm long 18 LEDs, 24 LEDs, 50cm long 15 LEDs, 24 LEDs, 30 LEDs, etc. There are also 60cm, 80cm, etc., different users have different specifications.
And can be cut at will, or can be arbitrarily extended and the illumination is not affected.
The FPC material is soft and can be bent, folded and wound freely, and can be moved and stretched in three dimensions without breaking.
It is suitable for use in irregular places and small spaces, and because it can be bent and wound arbitrarily,
it is suitable for arbitrarily combining various patterns in advertising decoration.

2. LED hard light strips are assembled with PCB hard boards. LEDs are assembled with patch LEDs.
They are also assembled with in-line LEDs. Different components are used depending on the needs.
The advantage of the hard light bar is that it is relatively easy to fix, and it is convenient to process and install;
the disadvantage is that it cannot be bent at will and is not suitable for irregular places.
The LED strips for hard light strips have 18 LEDs, 24 LEDs, 30 LEDs, 36 LEDs, 40 LEDs, etc.
There are 18, 24, 36, and 48 different specifications for in-line LEDs. There are front and side, and the side is also called the Great Wall Light Bar.

1, Soft, can curl like a wire.
2, Able to cut and extend.
3. The bulb and circuit are completely covered in flexible plastic, which has good insulation and waterproof performance and is safe to use.
4. Strong weather resistance.
5, Not easy to break, long service life.
6, Easy to produce graphics, text and other shapes;
has been widely used in buildings, bridges, roads, gardens, courtyards, floors, ceilings, furniture, cars, ponds, underwater, advertising, signs, signs, etc.


If you want to know more information, you can click this link. 

Leave your messages

Send Inquiry Now